NEWS

18,560 Square Feet of Protection … Blastech Mobile blasted plate to SSPC-SP10, protected edges, and applied 5 mils DFT of a Polyamide Epoxy Primer for a recent ground storage tank project.

The Tarsco Bolted Tank team completes a wastewater tank project in Barnwell, SC.  We strive to provide our customers with the best value and the most advanced storage tank solutions in the industry.  Call us today to schedule an appointment with one of our trained sales managers in your area.  Toll Free 1-866-700-2500, International 1-417-845-5588.  

Blastco completed the rehabilitation of two ground water storage tanks for the City of Orange, TX. The existing cone roofs were removed from both tanks and replaced with aluminum geodesic dome roofs. Wind girders had to be installed and both tanks were 100% recoated on the interior and exterior. The project also included miscellaneous weld repairs, electrical service upgrades and valve replacements. 

Blastco completed this potable water tank in San Jose, CA.  The interior is a three coat epoxy system and the exterior has a two coat epoxy system with a high solids polyurethane finish.  

Globaltherm Insulation is currently insulating two Hot Oil Storage Tanks at Coastal Energy Corporation’s Terminal in Missouri. Application includes facilitating high operational temperature, and custom match color of exterior weather jacketing.

Tarsco Bolted Tank’s multi-million dollar equipment investments improve the complete manufacturing process offered on each project providing the safest construction crews, a high speed laser cutting system, and an enhanced state-of-the-art coating process.  

Tarsco Bolted Tank completed two dry bulk tanks for a project in Fargo, ND.  The tanks are erected from ground level with a jacking system, improving safety at the construction site.  This system eliminates expensive cranes and improves our ability to work in confined spaces. 

Tarsco, along with Blastco and Globaltherm, recently completed this four tank project located in Rock Springs, WY.  The project consisted of one ammonia tank, one demineralized water tank, and two fire water tanks. Globaltherm insulated the exterior of the ammonia tank shown, while Blastco blasted and primed with a SP10/NACE 2 blast, two coats of epoxy phenolic and the roof received two coats of epoxy.  

Brant Corrosion Control wrapped up the last four filters of a 12-piece project for a customer in Saudi Arabia. The interiors were lined with a general purpose semi-hard natural rubber. The exteriors were coated with inorganic zinc and finished with a high-build epoxy.

Blastech is processing a large volume of both small and large bore pipe. This project requires a high build epoxy phenolic lining for the interior. The exterior coating varies from either a standard epoxy or a zinc-rich epoxy with a polysiloxane topcoat based on indoor or outdoor installation at site.