Tarsco Bolted Tank Completes Two Dry Bulk Tanks in Fargo, ND
Tarsco Bolted Tank completed two dry bulk tanks for a project in Fargo, ND. The tanks are erected from ground level with a jacking system, improving safety at the construction site. This system eliminates expensive cranes and improves our ability to work in confined spaces.
Tarsco, Along with Blastco and Globaltherm Complete Four Tank Project in Rock Springs, WY
Tarsco, along with Blastco and Globaltherm, recently completed this four tank project located in Rock Springs, WY. The project consisted of one ammonia tank, one demineralized water tank, and two fire water tanks. Globaltherm insulated the exterior of the ammonia tank shown, while Blastco blasted and primed with a SP10/NACE 2 blast, two coats of epoxy phenolic and the roof received two coats of epoxy.
Blastech Processing Large Volume of Bore Pipe
Blastech is processing a large volume of both small and large bore pipe. This project requires a high build epoxy phenolic lining for the interior. The exterior coating varies from either a standard epoxy or a zinc-rich epoxy with a polysiloxane topcoat based on indoor or outdoor installation at site.
Brant Corrosion Control Completes 12-Piece Project in Saudi Arabia
Brant Corrosion Control wrapped up the last four filters of a 12-piece project for a customer in Saudi Arabia. The interiors were lined with a general purpose semi-hard natural rubber. The exteriors were coated with inorganic zinc and finished with a high-build epoxy.
Blastech Rail Services is Strategically Located in Southern Ontario
Strategically located in Southern Ontario, Blastech Rail Services specializes in epoxy and rubber linings, as well as mechanical repairs on new and rehabilitated tank cars. The facility is serviced by CN Rail, siding FE47 and is AAR M1003 certified to M1002 requirements.
