Premium Plate Supplies Material for Tank Maintenance and Repair Projects
Premium Plate can supply material for your next tank maintenance and repair project that can be cut, beveled and fabricated to your engineered specifications. We can offer the material for tank bottoms, roof/deck plates, tank shells, pontoons, and wind girders as well as provide the shop blasting and priming, then deliver the steel to your jobsite on time. Contact us today at (251) 328-4110 or email This email address is being protected from spambots. You need JavaScript enabled to view it. to learn more.
Globaltherm Provides Standing Seam and Flat Panel Roofing Systems to Meet the Needs of Your Project
Globaltherm has developed metal sheathed standing seam and flat panel roofing systems to meet the specific needs of your project. All roofing systems are designed to be weather-tight, corrosion resistant, to expand and contract with the thermal movements of the tank, and to be aesthetically pleasing. Common insulation materials used include mineral wool, fiberglass, calcium silicate and polyisocyanurate foam. Contact Jimmy Hammond at (281) 475-2065 or click here to learn more.
Blastech Rail Services Becomes New Member of CARS (Canadian Association of Railway Suppliers)
Blastech Rail Services has recently become a member of CARS (Canadian Association of Railway Suppliers) who represents 155 companies selling products and services to railways and transits domestically and internationally. Strategically located in southern Ontario, Blastech Rail Services provides an efficient and economical solution to industry demands for maintenance of lined tank cars. We routinely perform mechanical inspections and repairs, interior lining inspections and repairs or complete replacements of interior rubber linings and spray-applied coatings. We also provide hazardous chemical cleaning and waste water disposal. Blastech Rail Services is the only AAR approved Rail Shop in Canada that performs rubber lining work. We are M1003 certified to M1002 requirements. We are your single source solution for mechanical work and lining qualifications. Call us at (519) 861-0072 or click here to learn more.
Blastco, Along with Tarsco Completed This Sulfuric Acid Tank in Pasadena, TX
Blastco, along with Tarsco completed this cone roof tank used to store sulfuric acid in Pasadena, Texas. Tarsco constructed the 90’ diameter by 50’ high tank and Blastco crews came in to blast the exterior and apply a zinc/epoxy/urethane coating system. By utilizing the expertise within the TF Warren Group of companies, customers benefit from over 35 years of experience in the industry for storage tanks, structural products, and corrosion protection. Contact us today at (832) 299-3200 or visit our website to learn more.
Tarsco Bolted Tank Completed this Stainless Steel Tank for an Ozone Treatment Facility in California
Tarsco Bolted Tank completed this stainless steel water storage tank for an ozone treatment facility in California. The tank is 30.77ft in diameter by 16.04ft high with a total nominal capacity of 89,200 gallons and is designed to AWWA D103 standards. On every project, our in-house engineers provide detailed tank drawings with the ability to locate all accessories, tank calculations, foundation designs, seismic zones, wind and deck loads and plans for future expansion if needed. Call (866) 700-2500 or email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information.